Liquid Membrane

Approx. Rs 450 / KgGet Latest Price

Product Details:

Asian Paints SmartCare Hybrid PU Sealant is a single component, moisture curing, low modulus silyl terminated polyurethane sealant for sealing of dynamic joints and cracks in interiors as well as exteriors. After curing, it forms a flexible rubber-type seal that is paintable.

Approx. Rs 250 / LitreGet Latest Price

Product Details:

Product Specification Product Description

To fulfill the assorted requirements of our clients in the best possible and trusted manner we are passionately engaged in offering a wide range of Smartcare Damp Proof Paint.

Other Details:

Waterproof

Heat Proof

Fibre reinforced

Only for base paint, add colorant

Product Price :Get Latest Price

Product BrochureProduct Details:

ShaliUrethane® LHM is single component, solvent based, high tensile, moisture cured, modified Polyurethane elastomeric, hydrophobic, liquid membrane for waterproofing with high elongation. When applied, it forms a seamless monolithic membrane by reaction with atmospheric moisture. Approval / Standards Conforms to ASTM C-836 and ASTM C-898. Product Information Form, Colour, Composition Black / Grey Polyurethane liquid Handling & Storage Store in a cool dry clean place, at 4°C - 27°C in original sealed container. In the unlikely event of formation of an easily removable protective skin of ShaliUrethane® LHM on top during storage, remove the film before applying the material. Packaging Available in 25 kg drums. Shelf Life 9 Months from the date of manufacture when maintain in protected storage in original unopened sealed condition at 5 - 38°C. Handling Precautions As with all chemical products, care should be taken during use and storage to avoid contact with eyes mouth, skin and foodstuffs. Treat splashes to eyes and skin immediately. If accidentally ingested, seek immediate medical attention. Keep away from children and animals. Reseal containers after use. 

Product Price :Get Latest Price

Product BrochureShaliUrethane® LHM 2K 80 is a two component, high tensile, UV resistant, elastic, cold applied Polyurethane liquid membrane for water proofing and surface protection. Approval/Standard Conforms to ASTM C 836 and ASTM C 898. Product Information Form, Colour, Mixing Ratio Grey liquid, with mixing ratio of Component A : Component B = 63 : 37 (w/w) Handling & Storage Store under cover out of direct sunlight and protect from extremes of temperature. In tropical climates the product must be stored in an air-conditioned environment. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. Packaging Available in 12.5 Kg unit pack (A+B); 7.9 kg = A & 4.6 kg = B Shelf Life 12 Months from the date of manufacture when maintain in protected storage in original unopened sealed condition at 5 - 38°C. Handling Precautions As with all chemical products, care should be taken during use and storage to avoid contact with eyes mouth, skin and foodstuffs. Treat splashes to eyes and skin immediately. If accidentally ingested, seek immediate medical attention. Keep away from children and animals. Reseal containers after use.

Product Price :Get Latest Price

Product BrochureProduct Specification Product DescriptionShaliKote® T-10 / ShaliKote® T-10A is water based bituminous emulsion with finely divided bitumen dispersed in water and is ready for application on wet surfaces.

Product Price :Get Latest Price

ShaliKote® LM is an elastomeric, liquid applied, emulsified asphalt membrane designed for waterproofing sunken floors, balconies and chajjas. 

Product Price :Get Latest Price

Product BrochureShaliUrethane® BTD is high performance, water based, cold applied, single component elastomeric insitu liquid membrane for waterproofing usually produced in White / Terracotta / Green colour. It may also be supplied in Black colour against specific orders. ShaliUrethane® BTD is UV resistant. However, for better UV resistance, we recommend use of White colour BTD, having SRI Index >109, thus facilitating considerable saving in energy. ShaliUrethane® BTD forms a seamless monolithic membrane and can be applied on moist surface. It conforms to ASTM C 836 and ASTM D 6083-97a. Use Horizontal / Vertical grades for horizontal / vertical application respectively

Product Price :Get Latest Price

Product BrochureTarFelt® Characteristics - Physical LM is water based, cold applied, single component, elastomeric in-situ seamless monolithic coating. This unique system is ready to use acrylic modified bituminous liquid membrane.